油水界面计WL550美国global water

产品名称: 油水界面计

型号系列:WL550

品牌:global water

产地:美国

价格:成交价格需联系客服




Global Water 的 WL550 油/水界面测量仪可测量小至 1/2 英寸的监测井中漂浮（轻质非水相液体或 LNAPL）、下沉（稠密非水相液体或 DNAPL）碳氢化合物和水的深度和厚度(12.5 mm) 内径，使用光学探头实现行业的精度。

美国global water油水界面计WL550概述

WL550 油水界面计使用的电子设备，可在现场提供可靠、坚如磐石的性能。与其他类似的油水界面仪表相比，这允许更多的读数和更准确的测量。油水界面探头使用红外折射检测碳氢化合物，使用电导率检测水。
油水界面仪表的三重密封探头无需用户接触。使用“智能电子设备”，油水界面探头将忽略对光学镜头的任何损坏并继续执行。与水位计类似，WL550 油水界面计在水中产生稳定的音调，间歇性的灯光和音调表明存在碳氢化合物。该系统使油水界面计的电池寿命加倍，并提供更好的整体性能。

美国global water油水界面计WL550主要特征：

• 精确测量、简单和耐用
• 质量的钢芯工程胶带
• 自动休眠功能
• 智能电子设备可忽略严重的划痕、冷凝和滴油
• 易于取用的电池抽屉
• 音频警报蜂鸣器和 LED 指示与水接触

标准油水界面探头直径为 5/8 英寸（16 毫米）；但是，可提供用于 ½ 英寸（12.7 毫米）内径孔的独特 7/16 英寸（11 毫米）探头。耐冲击油水界面探头可抵抗环境监测中发现的所有溶剂。油水界面计的探头比使用聚氨酯或聚砜光学元件的探头更耐化学腐蚀。不锈钢护罩保护和固定油水界面探头，同时比塑料护罩更耐用。油水界面计的光学传感器和电子设备协同工作以忽略轻微或严重的划痕。WL550 油水界面探头设定了新的行业标准，可检测 0.02 英寸（½ 毫米）的碳氢化合物层，而典型的碳氢化合物检测限为 0.12 英寸（3 毫米）。油水界面仪表可根据用户偏好重新校准至 0.04 英寸（1 毫米）、0.08 英寸（2 毫米）或 0.12 英寸（3 毫米）碳氢化合物检测限。可以提高油水界面仪表的水灵敏度以确保快速读数，或者在水中含有许多溶解性固体时降低水灵敏度以避免桥接，从而在所有现场条件下为用户提供理想的性能。

专为测量碳氢化合物和有机溶剂而设计，油水界面测量带的精度是普通白色电视电缆型带的四倍。油水界面计量带使用精度的黄色卷尺（0.008% 或更好的保证）。所有油水界面表带均符合或超过联邦规范 US GGG-T-106E（美国）或 EEC CLASS ll（欧洲）。磁带零点和探头零点重合在 0.01 英寸（0.254 毫米）与大多数行业标准油水界面仪表上的 0.06 英寸（1.52 毫米）之间。常见的白色扁平胶带使用绞合不锈钢线，每 100 英尺（30.5 米）油水界面计电缆的自重可以解开并延长 1/2 英寸（13 毫米）。
 

美国global water油水界面计WL550规格

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：

Global Water’s WL550 Oil/Water Interface Meters measure the depth and thickness of floating (Light Non-Aqueous Phase Liquids or LNAPLs), sinking (Dense Non-Aqueous Phase Liquids or DNAPLs) hydrocarbons and water in monitoring wells as small as 1/2 inch (12.5 mm) inner diameter using an optical probe for industry-leading accuracy.

Overview
Using state-of-the-art electronics, the WL550 Oil Water Interface Meters deliver reliable, rock-solid performance in the field. This allows more readings and more accurate measurements compared to other similar oil-water interface meters. The oil-water interface probes use infra-red refraction to detect hydrocarbons and conductivity to detect water.
The oil-water interface meter's triple-sealed probes do not need to be accessed by the user. Using "smart electronics," the oil-water interface probes will ignore any damage to the optical lens and continue to perform. Similar to a water level meter, the WL550 Oil Water Interface Meters produce a solid tone in water, and an intermittent light and tone indicate the presence of hydrocarbons. This system doubles the oil-water interface meter's battery life and provides better overall performance.

Key Features:
• Precision measurement, simplicity, and durability
• Highest quality steel core engineering tapes
• Automatic sleep function
• Smart electronics ignore severe scratches, condensation, and dripping oil
• Easy access battery drawer
• Audio alert beeper and LED indicate contact with the water

The standard oil-water interface probes are 5/8 inch (16 mm) in diameter; however, a unique 7/16 inch (11 mm) probe for ½ inch (12.7 mm) ID wells is available. Impact proof oil-water interface probes resist all solvents found in environmental monitoring. The oil-water interface meter's probes are far more chemically resistant than probes using polyurethane or polysulfone optics. Stainless steel shrouds protect and secure the oil-water interface probes while being more durable than plastic shrouds. The oil-water interface meter's optical sensor and electronics work together to ignore minor or severe scratches. Setting a new industry standard, the WL550 oil-water interface probes will detect a 0.02 inch (½ mm) layer of hydrocarbons versus the typical 0.12 inch (3 mm) hydrocarbon detection limit. The oil-water interface meters can be recalibrated to 0.04 inch (1 mm), 0.08 inch (2 mm), or 0.12 inch (3 mm) hydrocarbon detection limits for user preference. The water sensitivity can be increased on the oil-water interface meters to ensure quick readings or reduce to avoid bridging when the water contains many dissolved solids, giving the user ideal performance in all field conditions.

Designed specifically for measuring hydrocarbons and organic solvents, the oil-water interface meter tapes are four times more accurate than common flat white TV cable-type tapes. Oil-water interface meter tapes use the highest accuracy yellow measuring tapes available (0.008% or better guaranteed). All oil-water interface meter tapes meet or exceed federal specification US GGG-T-106E(U.S.A) or EEC CLASS ll (Europe). The tape zero points and probe zero-point coincide within 0.01 inches (0.254 mm) versus 0.06 inches (1.52 mm) found on most industry-standard oil-water interface meters. Common flat white tapes use twisted stainless steel wires that can untwist and lengthen up to 1/2 inch (13 mm) per 100 ft (30.5 m) from the oil-water interface meter cable's own weight. The unique flat spring steel measuring tape of the WL550 Oil Water Interface Meter has a breaking strength of 297 pounds (135 kg), allowing it to hang straighter than standard tapes and not stretch (less than 0.001 inches (0.025 mm) under a 35 pound (16 kg) load. A clear Kynar jacket covers the oil-water interface meter's conductors protecting the graduations and numerical markings. The oil-water interface meter's Kynar covering is about 4-5 times harder (Rockwell hardness) than softer polyethylene white tapes making it less likely to be cut or damaged. The WL550 Oil Water Interface Meter tapes are chemically resistant to all chemicals found in environmental monitoring and will not become softer when exposed to gasoline and other solvents. The covering also makes it easier to decontaminate Global Water's oil-water interface meters than meters with embossed tapes.

---

提示：“美国global water品牌WL550产品”内容及图片来自厂商官网、翻译或互联网引用等，内容仅供参考，以最终签订合同为准，如有差错或异议可联系我们更改。