美国YSI控制器IQ SensorNet 282-284

产品名称: 控制器

型号系列:IQ SensorNet 282-284

品牌:YSI

产地:美国

价格:**终成交价格需联系客服








借助易于扩展的解决方案，282 和 284 控制器可以连接到 1-4 个传感器，**多可以测量 20 个参数。随时轻松添加或更改传感器 - 所有 IQ SensorNet 传感器都与 282 和 284 控制器兼容。这种完全模块化的即插即用系统使您能够连续准确地监控和控制废水处理设施中的过程。

YSI IQ SensorNet 模块化、连续水质监测和控制系统

美国YSI控制器IQ SensorNet 282-284概述

YSI IQ SensorNet 282 和 284 控制器是用于完整传感器网络的模块化系统。这个功能强大、可靠的系统在过程控制设施的任何地方持续测量您的水质参数。直接的好处包括更好的网络可见性和管理、及早发现网络故障、提高对监管目标的合规性以及节省成本（能源、泵/鼓风机维护、劳动力）。

IQ SensorNet 282 和 284 控制器具有易于阅读的数字显示屏和 USB 接口以及用于进一步分析和故障排除的数据记录功能。282 和 284 可以连接几乎任何通信协议，包括 MODBUS TCP、MODBUS RTU、PROFIBUS 和 PROFINET。

282 或 284 系统能够测量：
溶解氧（光学或电化学）
酸碱度
ORP
电导率
温度
正磷酸盐
浊度——超声波清洗
TSS（总悬浮固体）——超声波清洗
铵
硝酸盐
亚硝酸盐——超声波清洗
NOx——超声波清洗
钾
氯化物*
COD/BOD——超声波清洗
TOC（总有机碳）——超声波清洗
DOC（TOC的溶解有机碳份额）——超声波清洗
SAC（光谱吸收系数）——超声波清洗
盐度
污泥水平
比电导
UVT-254 – 超声波清洗
*氯化物可以在终端的菜单中看到，但只有**后一个值。在 NitraLyt 或 VARiON 传感器上用作硝酸盐补偿时，没有实时监测和控制功能。

整个系统可容纳 1 到 4 个传感器，用于上述参数的任意组合。随时随地添加传感器或轻松更换传感器。只需更改传感器（参数）并开始获取新参数的数据。

只有 YSI 可以为您提供：
3年质保
防雷保护
模块化扩展
一根用于电源和通信的电缆
专门的专家回答您的任何应用问题


中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：

With an easily scalable solution, the 282 and 284 controllers can connect to 1-4 sensors, allowing up to 20 parameters to be measured. Add or change sensors at any time with ease - all IQ SensorNet sensors are compatible with the 282 and 284 controllers. This completely modular plug-and-play system allows you to monitor and control the process in your wastewater facility continuously and accurately.

IQ SensorNet Video Playlist

YSI IQ SensorNet modular, continuous water quality monitoring and control system

Overview
The YSI IQ SensorNet 282 and 284 controllers are a modular system for a complete sensor network. This powerful, reliable system continuously measures your water quality parameters anywhere in a facility for process control. Immediate benefits include better network visibility and management, early detection of network failures, improved compliance with regulatory targets and cost savings (energy, pump/blower maintenance, labor).

The IQ SensorNet 282 and 284 controllers have an easy-to-read digital display and a USB interface and data logging capabilities for further analysis and troubleshooting. The 282 and 284 can connect to almost any communication protocol including MODBUS TCP, MODBUS RTU, PROFIBUS and PROFINET.

The 282 or 284 system is capable of measuring:

Dissolved oxygen (optical or electrochemical)
pH
ORP
Conductivity
Temperature
Orthophosphate
Turbidity - ultrasonic cleaning
TSS (total suspended solids) - ultrasonic cleaning
Ammonium
Nitrate
Nitrite – ultrasonic cleaning
NOx – ultrasonic cleaning
Potassium
Chloride*
COD / BOD - ultrasonic cleaning
TOC (total organic carbon) - ultrasonic cleaning
DOC (dissolved organic carbon share of TOC) - ultrasonic cleaning
SAC (spectral absorption coefficient) - ultrasonic cleaning
Salinity
Sludge Level
Specific conductance
UVT-254 – ultrasonic cleaning
*Chloride can be seen in the menu on the terminal but only the last value. There is no real-time monitoring and control function when used on the NitraLyt or VARiON sensor as compensation for nitrate.

The entire system accommodates 1 to 4 sensors for the above listed parameters in any combination. Add sensors at any time and at any location or exchange them with ease. Simply change sensors (parameters) and start getting data for the new parameter.

Only YSI can offer you:

3-year warranty
Lightning protection
Modular expansion
One cable for power AND communications
Dedicated experts to answer any of your application questions

---

提示：“美国YSI品牌282-284产品”内容及图片来自厂商官网、翻译或互联网引用等，内容仅供参考，以最终签订合同为准，如有差错或异议可联系我们更改。