加拿大Solinst STS Edge地下水远程监测系统（9100）
STS Edge 地下水远程监测系统设计用于 Solinst 高质量数据记录器，包括 Levelogger 系列和 AquaVent。STS Edge 将水位、温度、电导率和降雨数据从现场发送到 Home Station PC。
￥联系客服
保 障：
原装正品售后保障增值税发票免运费
描述
加拿大Solinst STS Edge地下水远程监测系统（9100）
产品名称：STS Edge地下水远程监测系统
品牌：Solinst
产地：加拿大
型号：9100
STS Edge 地下水远程监测系统设计用于 Solinst 高质量数据记录器，包括 Levelogger 系列和 AquaVent。STS Edge 将水位、温度、电导率和降雨数据从现场发送到 Home Station PC。
来自桌面的双向 IP 通信允许附加功能，例如警报通知、远程诊断报告和远程更新，从而使您的系统易于维护，同时简化数据收集。
STS Edge 遥测系统是大型网络的理想选择。数百个远程站点可以向单个 Home Station 计算机报告。还可以选择与 RRL（远程无线电链路）网络进行桥接。（请参阅9200 RRL 型远程无线电链路数据表。）
用于可靠数据传输的 IP 通信
数据库导入到您自己的网站或列表
远程水位数据的气压补偿
从 Home Station 远程更新日程
每个数据报告的电池电量和状态更新
GPS 允许在遥测软件中进行位置映射
高或低级别警报通知
长期监测
取水管理
含水层管理
雨水监测
危险或极其重要的场所
长期地下水监测应用
干旱和取水管理
流域管理
垃圾填埋场和矿井水监管
洪水和雨水管理
调制解调器：Digi TransPortWR21 GSM 蜂窝调制解调器，适用于 2.5G/3G/4G 蜂窝网络，包括 LTE、HSPA、HSPA+ 和 1xRTT
沟通：Home Station PC 上的静态 IP 和远程 STS Edge 上的动态 IP，电子邮件警报通知
天线：3G/4G/LTE (699-960/1710-2690 MHz), 3 dBi, SMA 连接
数据文件类型：.mdb（数据库）、.xle、.lev 或 .csv（导出）
采样间隔：10 秒 - 99 小时
报告间隔：5 分钟 - 1 周
计划编程：通过 Home Station 的 Solinst 遥测软件完成初始设置和远程更新
电源：12V、12-30 Ahr 深循环、可充电密封铅酸电池
可选电源输入：10V - 16V 直流，15W
电池寿命示例：
（4 个数据记录器）1 年：基于每小时抽样和每日报告
内存容量：（报告之间）16 MB
工作温度：-30ºC 至 50ºC
可选外壳：NEMA 4X（IP66：防尘防水，不可浸没）
兼容的数据记录器：Levelogger Edge、Barologger Edge、Levelogger Junior Edge、LTC Levelogger Edge、Rainlogger Edge、LevelVent 和 AquaVent，以及 Levelogger Gold、Barologger Gold、Levelogger Junior、LTC Levelogger Junior 和 Rainlogger
连接的数据记录器数量：4
气压补偿：使用连接的 Barologger，在 Solinst 遥测软件中自动执行或由用户在外部数据库中执行
中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：
STS Edge Solinst Telemetry System:
STS Edge Telemetry Systems are designed for use with Solinst high quality dataloggers, including the Levelogger Series and AquaVent. The STS Edge sends water level, temperature, conductivity and rainfall data from the field to a Home Station PC.
Features:
Intuitive software for easy programming and setup
IP communication for reliable data transfer
Database to import to your own website or list
Barometric compensation of remote water level data
Remote schedule updates from the Home Station
Battery level and status updates with each data report
GPS allows location mapping in Telemetry Software
High or low level alarm notifications
Applications:
Remote water level monitoring
Long-term monitoring
Management of water taking
Aquifer management
Stormwater monitoring
STS Edge Remote Stations can be powered by a sealed leadacid 12V battery, and optionally, solar trickle charging or direct AC power. Up to four Solinst dataloggers can be connected to one STS Edge.
Two-way IP communication from your desktop allows added features such as alarm notification, remote diagnostic reporting, and remote updates, which makes it easy to maintain your system, while simplifying data collection.
STS Edge Telemetry Systems are ideal for large networks. Hundreds of remote stations can report to a single Home Station computer. There is also the option to bridge with an RRL (Remote Radio Link) network. (See Model 9200 RRL Remote Radio Link Data Sheet.)
STS Edge Applications:
Remote or difficult-to-access locations
Hazardous or critically important sites
Long-term groundwater monitoring applications
Drought and water taking management
Watershed management
Landfill and mine water supervision
Flood and stormwater management
STS Edge Specifications:
Modem: Digi TransPort WR21 GSM Cellular Modem for 2.5G/3G/4G cellular network, including LTE, HSPA, HSPA+ and 1xRTT
Communication: Static IP at Home Station PC and Dynamic IP at remote STS Edge, e-mail alarm notifications
Antennas: 3G/4G/LTE (699-960/1710-2690 MHz), 3 dBi, SMA connection
Data File Type: .mdb (database), .xle, .lev or .csv (exported)
Sampling Interval: 10 seconds - 99 hours
Reporting Interval: 5 minutes - 1 week
Schedule Programming: Initial setup and remote updates done through Solinst Telemetry Software at Home Station
Power Supply: 12V, 12-30 AHr deep-cycle, rechargeable sealed lead-acid battery
Optional Power Input: 10V - 16V DC, 15W
Battery Life Example:
(4 dataloggers) 1 year: based on hourly sampling and daily reporting
Memory Capacity:(Between Reports) 16 MB
Operating Temperature: -30ºC to 50ºC
Optional Enclosure: NEMA 4X (IP66: dust and water proof, can not be submerged)
Compatible Dataloggers: Levelogger Edge, Barologger Edge, Levelogger Junior Edge, LTC Levelogger Edge, Rainlogger Edge, LevelVent, and AquaVent, as well as Levelogger Gold, Barologger Gold, Levelogger Junior, LTC Levelogger Junior and Rainlogger
Number of Connected dataloggers: 4
Barometric Compensation: Using a connected Barologger, automatically performed in Solinst Telemetry Software or by user in external database
产品名称：STS Edge地下水远程监测系统
品牌：Solinst
产地：加拿大
型号：9100
STS Edge 地下水远程监测系统设计用于 Solinst 高质量数据记录器，包括 Levelogger 系列和 AquaVent。STS Edge 将水位、温度、电导率和降雨数据从现场发送到 Home Station PC。
Solinst STS Edge地下水远程监测系统（9100）的介绍：
STS Edge 远程站可以由密封的 12V 铅酸电池供电，也可以选择太阳能涓流充电或直接交流电源。**多四个 Solinst 数据记录器可以连接到一个 STS Edge。来自桌面的双向 IP 通信允许附加功能，例如警报通知、远程诊断报告和远程更新，从而使您的系统易于维护，同时简化数据收集。
STS Edge 遥测系统是大型网络的理想选择。数百个远程站点可以向单个 Home Station 计算机报告。还可以选择与 RRL（远程无线电链路）网络进行桥接。（请参阅9200 RRL 型远程无线电链路数据表。）
Solinst STS Edge地下水远程监测系统（9100）的特征：
易于编程和设置的直观软件用于可靠数据传输的 IP 通信
数据库导入到您自己的网站或列表
远程水位数据的气压补偿
从 Home Station 远程更新日程
每个数据报告的电池电量和状态更新
GPS 允许在遥测软件中进行位置映射
高或低级别警报通知
Solinst STS Edge地下水远程监测系统（9100）的应用：
远程水位监测长期监测
取水管理
含水层管理
雨水监测
STS 边缘应用：
偏远或难以到达的位置危险或极其重要的场所
长期地下水监测应用
干旱和取水管理
流域管理
垃圾填埋场和矿井水监管
洪水和雨水管理
Solinst STS Edge地下水远程监测系统（9100）的参数：
调制解调器：Digi TransPortWR21 GSM 蜂窝调制解调器，适用于 2.5G/3G/4G 蜂窝网络，包括 LTE、HSPA、HSPA+ 和 1xRTT
沟通：Home Station PC 上的静态 IP 和远程 STS Edge 上的动态 IP，电子邮件警报通知
天线：3G/4G/LTE (699-960/1710-2690 MHz), 3 dBi, SMA 连接
数据文件类型：.mdb（数据库）、.xle、.lev 或 .csv（导出）
采样间隔：10 秒 - 99 小时
报告间隔：5 分钟 - 1 周
计划编程：通过 Home Station 的 Solinst 遥测软件完成初始设置和远程更新
电源：12V、12-30 Ahr 深循环、可充电密封铅酸电池
可选电源输入：10V - 16V 直流，15W
电池寿命示例：
（4 个数据记录器）1 年：基于每小时抽样和每日报告
内存容量：（报告之间）16 MB
工作温度：-30ºC 至 50ºC
可选外壳：NEMA 4X（IP66：防尘防水，不可浸没）
兼容的数据记录器：Levelogger Edge、Barologger Edge、Levelogger Junior Edge、LTC Levelogger Edge、Rainlogger Edge、LevelVent 和 AquaVent，以及 Levelogger Gold、Barologger Gold、Levelogger Junior、LTC Levelogger Junior 和 Rainlogger
连接的数据记录器数量：4
气压补偿：使用连接的 Barologger，在 Solinst 遥测软件中自动执行或由用户在外部数据库中执行
中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：
STS Edge Solinst Telemetry System:
STS Edge Telemetry Systems are designed for use with Solinst high quality dataloggers, including the Levelogger Series and AquaVent. The STS Edge sends water level, temperature, conductivity and rainfall data from the field to a Home Station PC.
Features:
Intuitive software for easy programming and setup
IP communication for reliable data transfer
Database to import to your own website or list
Barometric compensation of remote water level data
Remote schedule updates from the Home Station
Battery level and status updates with each data report
GPS allows location mapping in Telemetry Software
High or low level alarm notifications
Applications:
Remote water level monitoring
Long-term monitoring
Management of water taking
Aquifer management
Stormwater monitoring
STS Edge Remote Stations can be powered by a sealed leadacid 12V battery, and optionally, solar trickle charging or direct AC power. Up to four Solinst dataloggers can be connected to one STS Edge.
Two-way IP communication from your desktop allows added features such as alarm notification, remote diagnostic reporting, and remote updates, which makes it easy to maintain your system, while simplifying data collection.
STS Edge Telemetry Systems are ideal for large networks. Hundreds of remote stations can report to a single Home Station computer. There is also the option to bridge with an RRL (Remote Radio Link) network. (See Model 9200 RRL Remote Radio Link Data Sheet.)
STS Edge Applications:
Remote or difficult-to-access locations
Hazardous or critically important sites
Long-term groundwater monitoring applications
Drought and water taking management
Watershed management
Landfill and mine water supervision
Flood and stormwater management
STS Edge Specifications:
Modem: Digi TransPort WR21 GSM Cellular Modem for 2.5G/3G/4G cellular network, including LTE, HSPA, HSPA+ and 1xRTT
Communication: Static IP at Home Station PC and Dynamic IP at remote STS Edge, e-mail alarm notifications
Antennas: 3G/4G/LTE (699-960/1710-2690 MHz), 3 dBi, SMA connection
Data File Type: .mdb (database), .xle, .lev or .csv (exported)
Sampling Interval: 10 seconds - 99 hours
Reporting Interval: 5 minutes - 1 week
Schedule Programming: Initial setup and remote updates done through Solinst Telemetry Software at Home Station
Power Supply: 12V, 12-30 AHr deep-cycle, rechargeable sealed lead-acid battery
Optional Power Input: 10V - 16V DC, 15W
Battery Life Example:
(4 dataloggers) 1 year: based on hourly sampling and daily reporting
Memory Capacity:(Between Reports) 16 MB
Operating Temperature: -30ºC to 50ºC
Optional Enclosure: NEMA 4X (IP66: dust and water proof, can not be submerged)
Compatible Dataloggers: Levelogger Edge, Barologger Edge, Levelogger Junior Edge, LTC Levelogger Edge, Rainlogger Edge, LevelVent, and AquaVent, as well as Levelogger Gold, Barologger Gold, Levelogger Junior, LTC Levelogger Junior and Rainlogger
Number of Connected dataloggers: 4
Barometric Compensation: Using a connected Barologger, automatically performed in Solinst Telemetry Software or by user in external database
提示：“加拿大Solinst品牌9100产品”内容及图片来自厂商官网、翻译或互联网引用等，内容仅供参考，以最终签订合同为准，如有差错或异议可联系我们更改。
您可能感兴趣的商品...
加拿大Solinst多水位地下水监测系统Waterloo 401
Waterloo 401自营